D-Link DIR-140L User Manual - Page 33
Network Settings
View all D-Link DIR-140L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3 - Configuration Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. Router IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Enable DHCP Check this box to enable the DHCP server on your router. Server: Uncheck to disable this function. DHCP IP Address Enter the starting and ending IP addresses for the DHCP Range: server's IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time: The length of time for the IP address lease. Enter the Lease time in minutes. Primary WINS IP Address: Enter your primary WINS Server IP address. Secondary WINS IP Address: Enter your secondary WINS Server IP address. Enable: Check this box to enable the DHCP reservations. Computer Name: Enter the computer name or select from the drop-down menu. D-Link DIR-140L User Manual 29