D-Link DIR-140L User Manual - Page 43
PPTP/L2TP Settings, Connection Type, VPN Server IP, Remote IP Range, Authentification, Protocol
View all D-Link DIR-140L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Section 3 - Configuration PPTP/L2TP Settings This page allows you to set up a VPN using either PPTP or L2TP. L2TP: Check this box to enable PPTP/L2TP settings. Name: Enter a name for your VPN. Connection Type: Select PPTP or L2TP. VPN Server IP: Enter the IP address of the VPN server. Remote IP Range: Enter the remote IP range in the boxes. Authentification Protocol: Choose PAP, CHAP, or MSCHAP v2 for your authentification. MPPE Encryption Mode: Choose either RC4, None, 40 bit, or 128 bit to determine the strength level of your authentification. Extended If you wish to use extended authentification, choose a group Authentification: from the drop-down menu. D-Link DIR-140L User Manual 39
39
D-Link DIR-140L User Manual
Section 3 - Configuration
PPTP/L2TP Settings
This page allows you to set up a VPN using either PPTP or L2TP.
Check this box to enable PPTP/L2TP settings.
Enter a name for your VPN.
Select
PPTP
or
L2TP
.
Enter the IP address of the VPN server.
Enter the remote IP range in the boxes.
Choose
PAP
,
CHAP
, or
MSCHAP.v2
for your authentification.
Choose either
RC4
,
None
,
40.bit
, or
128.bit
to determine the
strength level of your authentification.
If you wish to use extended authentification, choose a group
from the drop-down menu.
L2TP:
Name:
Connection Type:
VPN Server IP:
Remote IP Range:
Authentification
Protocol:
MPPE Encryption
Mode:
Extended
Authentification: