D-Link DIR-605 User Manual - Page 57

Configure WPA, WPA2, and WPA/WPA2 RADIUS

Get D-Link DIR-605 PDF manuals and user guides View all D-Link DIR-605 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Section 4 - Security Configure WPA, WPA2, and WPA/WPA2 (RADIUS) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side. 2. Next to Security Mode, select Enable WPA Only Wireless Security (enhanced), Enable WPA2 Only Wireless Security (enhanced), or Enable WPA/WPA2 Wireless Security (enhanced). 3. Next to Cipher Type, select TKIP, AES, or Auto. 4. Next to PSK/EAP, select EAP. 5. Next to RADIUS Server 1 enter the IP Address of your RADIUS server. 6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 9. Click Save Settings to save your settings. D-Link DIR-605 User Manual 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
57
D-Link DIR-605 User Manual
Section 4 - Security
Configure WPA, WPA2, and WPA/WPA2 (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on
Wireless Settings
on the left side.
2.
Next to
Security Mode
, select
Enable WPA Only Wireless Security (enhanced),
Enable WPA2 Only Wireless Security (enhanced),
or
Enable WPA/WPA2 Wireless Security (enhanced)
.
3.
Next to
Cipher Type
, select
TKIP
,
AES
,
or
Auto
.
4.
Next to
PSK/EAP
, select
EAP
.
5.
Next to
RADIUS Server 1
enter the
IP Address
of
your RADIUS server.
6.
Next to
Port
, enter the port you are using with your
RADIUS server.
1812
is the default port.
7.
Next to
Shared Secret
, enter the security key.
8.
If you have a secondary RADIUS server, enter its IP
address, port, and secret key.
9.
Click
Save Settings
to save your settings.