D-Link DIR-605 User Manual - Page 8
Installation - d link manual
View all D-Link DIR-605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the WAN port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet. Wall Mounting Installation The device can be mounted on the wall or the partition. To install, A). Screw the provided screws with the equipment to the wall or partition where the device to be placed. B). Turn the device, let the bottom toward to the fixed screws then mount it in the wall or partition. C). Using the cables connect to the back panel. D-Link DIR-605 User Manual 8