D-Link DIR-640L User Manual - Page 32
Russian PPTP, Russian.PPTP.Dual.Access, Always-on, On-Demand, Manual, Static.IP, Dynamic
View all D-Link DIR-640L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3 - Configuration Russian PPTP Choose Russian PPTP (Dual Access) if your ISP uses an PPTP connection in Russia with WAN physical access. My Internet Connection: Select Russian PPTP (Dual Access) from the drop-down menu. PPTP Server IP Address: Enter the IP address provided by your ISP. User Name: Enter your PPTP user name. Password: Enter your PPTP password and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Enter the desired Maximum Transmission Unit. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Address: Enter the PPTP IP address. PPTP Subnet Mask: Enter your PPTP subnet mask. PPTP Gateway IP Address: Enter the PPTP Gateway IP address. MAC Address: The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. DNS Addresses: Enter the Primary and Secondary DNS Server Addresses. D-Link DIR-640L User Manual 28