D-Link DIR-640L User Manual - Page 48
IPSec Settings, IPSec, Local Subnet, Netmask, Remote IP, Remote Subnet, Authentification
View all D-Link DIR-640L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Section 3 - Configuration IPSec Settings The DIR-640L supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) protocols can provide IP security at the network layer. IPSec: Check this box to enable IPSec. Name: Enter a name for your VPN tunnel. Local Subnet/ Enter the local (LAN) subnet and mask. Netmask: (ex. 192.168.0.0/24) Remote IP: Select if you will be connecting as a remote user or on a site to site basis. Remote Subnet/ Netmask: Enter the remote subnet and mask. Authentification Pre-Shared Key: Enter the key for authentification. Authentification If you choose to enable XAUTH you need to choose between XAUTH: Server mode with an Authetification database, or Client mode with a user name and password. Local ID: Enter the local identification for how you appear on the network VPN when connected locally. Remote ID: Enter the local identification for how you appear on the network VPN when connected remotely. D-Link DIR-640L User Manual 44