D-Link DIR-640L User Manual - Page 94
Setup, Manual.Configure, for the device.
View all D-Link DIR-640L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Section 9 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we're working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (http://192.168.0.1) and click OK. • Enter your username (admin) and password (should be left empty). Click OK to enter the web configuration page for the device. • Click on Setup and then click Manual Configure. D-Link DIR-640L User Manual 90