D-Link DIS-2650AP Product Manual - Page 7
Hardware Overview, Front Panel, Side Panel
View all D-Link DIS-2650AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Hardware Overview Hardware Overview Front Panel Side Panel DIS-2650AP CONSOLE RESET LAN2 LAN1/ POE 5G 2.4G ALARM POE PWR2 PWR1STATUS SIGNAL 43 1 Solid Red Indicates the access point has malfunctioned. 1 Power/Status Blinking Red This LED will blink during boot-up. Solid Green Indicates that the DIS-2650AP is working properly. 2 2 Power Receptor Connect the supplied power adapter. 3 LAN (PoE) Port Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable. Press and hold for five seconds to reset the access point 4 Reset Button to the factory default settings. Press and hold for one second to reboot the access point. 7
Hardware Overview
7
Hardware Overview
Front Panel
2
Power Receptor
Connect the supplied power adapter.
3
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router
via an Ethernet cable.
4
Reset Button
Press and hold for five seconds to reset the access point
to the factory default settings. Press and hold for one
second to reboot the access point.
1
Power/Status
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DIS-2650AP is working
properly.
DIS-2650AP
5G
2.4G
ALARM
POE
PWR2
PWR1
STATUS
SIGNAL
CONSOLE
RESET
LAN2
LAN1/ POE
1
3
4
Side Panel
2