D-Link DNS-G120 Manual - Page 26
Home > Wireless
UPC - 790069281815
View all D-Link DNS-G120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
DNS-G120 User's Manual Home > Wireless Using the Configuration Utility Wireless: Select Enabled or Disabled. Connection Mode: Select the network type from the drop-down menu. Infrastructure - Connect to an access point or router. Ad-Hoc - Connect to another wireless client (peer-to-peer). SSID: Enter the SSID of your network. You may click Site Survey to select an available wireless AP or router. Security Mode: Select WEP or WPA-PSK. For more information, see page 27. Authentication: WEP can use different methods of Authentication. Select either Open or Shared. Open: to allow any wireless station to associate with the access point. Shared: to only allow stations using a shared key encryption to associate with it. Encryption Mode: Select the level of WEP encryption (64 or 128-bit). WPA-PSK only uses TKIP. Key Format: Select the WEP/WPA-PSK key format (Hexadecimal or ASCII) Hexadecimal - only A-F and 0-9 are valid characters. ASCII - All numbers and letters are valid characters. Default Key: Select which WEP key to activate. Key (1-4): Enter a WEP key. You can make up to 4 different keys. Pre-Shared Key: Enter a WPA-PSK passphrase. Please refer to page 11 if you wish to use Windows® Connect Now to configure the wireless settings on your DNS-G120. D-Link Systems, Inc. 26