D-Link DSA-3100P Manual - Page 11
Setting up the DSA-3100
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting up the DSA-3100 Make sure the DSA-3100 unit is not connected to the power adapter and is powered OFF. WAN port connection Use 10/100BaseT connections to connect the unmanaged network. The unmanaged network's interface may be the ADSL router's LAN port, cable modem's LAN port or Intranet switch port. Private LAN port connection Use to connect to a local network. All ports are auto-mdix, which means that you can use a straight-through or a crossover cable for connections. Public LAN port connection Use to connect to a switch or an access point for Hotspot access. All ports are auto-mdix, which means that you can use a straight-through or a crossover cable for connections. Power ON Connect the supplied power adapter to the DSA-3100 and insert the plug on the other end into an electric outlet. Check the LEDs The power LED and WAN LED should be ON, if the corresponding WAN port is connected to an active cable/DSL modem or T1 line. The corresponding local network or authentication indicator should be ON if a network device is connected to the private network port or the public network port. 11