D-Link DSA-3100P Manual - Page 20
Home > Public Network, IP Address, Disable, Server, Subnet, Router, NAT_IP_PNP - dsa 3100 gateway
![]() |
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Using the Configuration Utility (continued) Home > Public Network The DSA-3100 allows the gateway to be set to one of three Authentication modes. Mode: Select NAT; NAT_IP_PNP or Router NAT: This mode protects the identity of the devices within the LAN from those devices outside the network. NAT_IP_PNP: All devices, regardless of their IP address, can gain access to the Internet through the DSA-3100 in this mode. Router: In this mode, the DSA-3100 will not protect the identity of the connected devices by translating their IP addresses and shielding them from detection outside the LAN. IP Address: Subnet Mask: Enter the IP address for the Authentication interface (the Public Network). Enter the subnet mask for the Authentication interface. Disable DHCP Server: Make this selection if you do not wish to use the built-in DHCP feature in the DSA-3100. 20 continued -
![](/manual_guide/products/dlink-dsa3100p-manual-3d891fc/20.png)