D-Link DSA-3100P Manual - Page 18
Home > WAN > Static IP Address, IP address, Subnet, Default, Gateway
![]() |
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the Configuration Utility (continued) Home > WAN > Static IP Address Static IP Address: IP address: Enter the IP address provided to you by your ISP. Subnet mask: Enter the subnet mask provided to you by your ISP. All devices on the network must have the same netmask. Default Gateway: Enter the IP address of the gateway, provided to you by your ISP. Dynamic IP Make this selection if there is a DHCP server in the network. Address: (See the following pages.) PPPoE Client: Make this selection if you connect to the Internet using DSL. (See the following pages.) 18
![](/manual_guide/products/dlink-dsa3100p-manual-3d891fc/18.png)
18
Using the Configuration Utility (continued)
Home > WAN > Static IP Address
Enter the IP address provided to you by your ISP.
IP address:
Enter the subnet mask provided to you by your ISP. All
devices on the network must have the same netmask.
Subnet
mask:
Enter the IP address of the gateway, provided to you
by your ISP.
Default
Gateway:
Static IP
Address:
Dynamic IP
Address:
PPPoE
Client:
Make this selection if there is a DHCP server in the network.
(See the following pages.)
Make this selection if you connect to the Internet using DSL.
(See the following pages.)