D-Link DSA-3100P Manual - Page 51
Tools > System, Tools > Firmware, Create Backup Image, Restore Setting From File - dsa 3100 firmware
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Using the Configuration Utility (continued) Allows you to make a backup image and restore the backup copy to the DSA-3100. This page also enables you to restore the DSA-3100 back to the factory default settings. Tools > System Create Backup Image: Make a backup image file. Restore Setting From File: Browse the hard drive to locate and restore the backup image file. (Important:The image must be created by the DSA-3100.) Reset To Factory Default: Click Reset to restore the DSA-3100 back to the factory default settings. Please click the link in the configuration screen shown here to check for firmware upgrades on the D-Link website. After you download the new firmware file to your hard drive, click Browse and then click Apply to upgrade the firmware. Tools > Firmware Caution: Firmware upgrades might result in configuration data loss. Some other restrictions might also apply. Please refer to the release notes of new firmware upgrades. When the system is upgrading its firmware, the Status LED blinks until done. When finished, the web interface will display a successful message. Please restart the DSA-3100 using the administration interface. Do not directly power it off and on. Restarting the DSA-3100 in this way, after a firmware upgrade, might result in corruption of the DSA-3100 firmware. (Online user sessions will be terminated when the system restarts.) 48