D-Link DSA-3100P Manual - Page 21
Home > Public Network continued, Enable, Relay, Server
UPC - 790069262906
View all D-Link DSA-3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Using the Configuration Utility (continued) Home > Public Network (continued) Enable DHCP Selecting this option activates the device's built-in DHCP server. Configure Server: the DHCP server with the following properties: DHCP Scope Enter the starting IP address, from which the DHCP Start IP server will assign to the DHCP-enabled devices Address: (clients) on the network. DHCP Scope End IP Enter the last IP address in the sequence of addresses from Address: which the DHCP server will assign to clients on the network. Lease Time: Domain Name: Select the length of time during which the DHCP assigned address will be in effect. Enter the domain name. WINS Server: Enter the WINS server's IP address, if one is present on the network. Primary DNS Server: Enter the IP address of the preferred DNS server. Secondary DNS Server: Enter the IP address of the alternate DNS server. Enable DHCP Relay: Select this mode to specify another DHCP server's IP address. 21