D-Link DV-600P User Manual - Page 75
Backup and Update the Devices’ Configuration, TFTP Server IP
![]() |
UPC - 790069601446
View all D-Link DV-600P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Backup and Update the Devices' Configuration Use the Batch tool to backup and update the devices' configuration. 1. Go to Application > Batch Config > Run Batch or right-click and select Run Batch from the popup menu after selecting the devices in the opened topology. The Run Batch screen displays. Figure 64: Run Batch screen 2. A brief description of other tabs is given below: • Save: Save device configuration. • RMON: Enable/Disable RMON status to monitor device performance. • Safeguard Engine: Enable/Disable safeguard status. Refer to Using Safeguard Check for more information. • Spanning Tree: Enable/Disable the status to prevent undesirable loops in the network. • Firmware Update: Upload/download firmware through TFTP server. • Resource: Select to update the resource information for a specific device. • Config File Manager: Update and backup configuration files from the TFTP server. • Port Status: Select to view the port status of the device. 3. Select the Config File Manager tab. The Config File Manager tool helps the administrators to perform the following actions. • TFTP Server IP: Enter the IP address on which the TFTP server program runs.
![](/manual_guide/products/dlink-dv600s-user-manual-3f6f729/75.png)