D-Link DV-600P User Manual - Page 89
To con Device Events, System, Event Manager, Device Event Config, Event, Configuration
![]() |
UPC - 790069601446
View all D-Link DV-600P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
To configure Device Events: 1. Go to System > Event Manager > Device Event Config. The Event Configuration screen displays. Figure 80: Event Configuration screen 2. Select a Device Group or a Device Name. 3. Select the Type of event. The different events are: TRAP INDICATION Up -> Down Down -> Up Cold Start Warm Start Link Down Link Up Device Authentication Fail EGP Fail The link between the device and the workstation (D-View) is disconnected. The link between device and the workstation is connected. Device sends Cold Start trap message when the device is powered off/on. Device sends Warm Start trap message when the device has been rebooted. Device sends Link Down trap message when the status of an attached communication interface has changed from up to down. Device sends Link Up trap message when the status of an attached communication interface has changed from down to up. Device sends Authentication Fail trap when the agent received a request from an unauthorized manager. In routers running the Exterior Gateway Protocol (EGP), an EGP Neighbor has changed to a down state.
![](/manual_guide/products/dlink-dv600s-user-manual-3f6f729/89.png)