D-Link DV-600P User Manual - Page 78
Using Safeguard Check, By default, the safeguard status of all devices is disabled.
![]() |
UPC - 790069601446
View all D-Link DV-600P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Using Safeguard Check Malicious hosts on the network could attack the Switch through various methods (for example, packet flooding). To overcome this situation, D-View uses Safeguard Engine to protect switches from malicious traffic flood. This minimizes the workload of the switch during the attack. The Switch, therefore, is capable of forwarding essential packets even during limited bandwidths. By default, the safeguard status of all devices is disabled. To configure the safeguard status: 1. Go to Application > Batch Config > Run Batch Or In the opened topology select the device and right-click and select Run Batch. The Run Batch screen displays. You can now enable or disable the devices' Safeguard Engine. Figure 68: Run Batch: Safeguard Engine screen 2. Check the devices and then select ENABLE from the Option drop-down list. 3. Click Apply to enable the Safeguard Engine status of the selected devices. 4. Go to Advanced > Safeguard Check for the updated enable status of the selected devices. The Safeguard Check screen displays.
![](/manual_guide/products/dlink-dv600s-user-manual-3f6f729/78.png)