D-Link DWL-2000AP Product Manual - Page 10

Wireless Basics (continued) Standards-Based Technology The DWL-2000AP Wireless Access Point utilizes the new 802.11g1 standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54 Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DWL-2000AP will automatically sense the best possible connection speed to ensure the greatest speed and range possible. 802.11g3 offers the most advanced network security features available today, including: WPA2 , 802.1x3, TKIP, AES and Pre-Shared Key mode. These security features are explained in more detail in the Introduction and the Features section of this manual. The DWL-2000AP is backwards compatible with 802.11b devices. This means that if you have an existing 802.11b network, the devices in that network will be compatible with 802.11g devices at speeds of up to 11Mbps in the 2.4GHz range. 1 802.11g standard is scheduled for ratification by IEEE Summer 2003 2 WPA will be available Spring 2003 as a free download 3 802.1x will be available Spring 2003 as a free download 10