D-Link DWS-3026 Product Manual - Page 51
Connecting the Switch and AP through the L2/L3 Network, Connecting to the Core Network
View all D-Link DWS-3026 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3 Installing the Hardware Connecting the Switch and AP through the L2/L3 Network The Switch can discover and manage APs whether they are directly connected, connected through a device in the same subnet, or connected to different subnets. Figure 29. Switch and APs Connected Through Network L2/L3 Network Access Point Access Point Connecting to the Core Network The optional 10GB ports on the DWS-3026 are ideal for uplinking to the core network. Connections to the Gigabit Ethernet ports are made using a fiber-optic cable or Category 5e copper cable, depending on the type of port. A valid connection is indicated when the Link LED is lit. Figure 30 shows the rear panel of the DWS-3026 with the optional DEM-410X module. Figure 30. Switch Connected to Network Core Fiber Optic Cable Core Network Connecting the Switch 51