DELPHI SA10034 Owners Manual - Page 6

Basic Operations CD/MP3, AM/FM, CLOCK MODULE Playing Audio CD or MP3 Files The Delphi CD Audio System can play CDs, CD-Rs, and CD-RWs recorded in Compact Disc Digital Audio (CD-DA) format, as well as MP3 files recorded in CDROM format**. Playback may vary depending on the quality of the compact disc and the condition of the recording device. To play compact discs: 1. Rotate the central unit so that the CD panel faces forward. Be sure to follow the arrows when rotating the unit. Complete the rotation until the unit locks in position. CAUTION: Do not use excessive force, which could damage the unit. 2. Press "Power" on the CD panel or remote control. 3. Holding the central unit steady, open the compartment lid and insert a compact disc in the CD player. 4. Close the CD compartment lid. Before playing a compact disc, your Delphi CD Audio System reads all file and directory information on the CD. Depending on file structure, this may take more than one minute. "READING" is displayed during this time. The first track on the CD will begin to play automatically. At the same time, information about the disc will display. CD 15 TRK 72:46 Total track numbers Total playback time Figure 6: Initial CD Display Proper Care and Storage of Compact Discs Scratches, dirt, and fingerprints on the surface of compact discs may cause tracking errors. For optimum sound quality: • Compact discs should be cleaned before playing; using a dry, soft cloth, wipe from the center out, never in a circular motion • Do not clean compact discs with benzene or other solvents, commercially available cleaners, or antistatic spray intended for vinyl LPs • Store CDs in their cases when not playing • Do not allow CDs to be exposed to direct sunlight or heat sources • Do not tape paper or apply stickers to CDs CD/MP3 Programming Options Your Delphi CD Audio System lets you program the playing order of up to 30 CD/MP3 tracks or MP3 directories. CD Program Play To program the playing order of tracks on a CD: 1. In CD/MP3 mode, stop playback. 2. Press "Memory" on the CD panel or "mem/prog" on the remote. "P01_ _" will flash on the LCD. 3. Press "Next" or "Prev" on the CD panel or the category keys or numeric keys on the remote to select a track number. 4. Press "Memory" or "mem/prog" to confirm. 5. "P02_ _" will flash. Continue Steps 3 and 4 until all tracks have been selected (up to a maximum of 30). 6. Press "Play" on the CD panel or the enter key on the remote to play. SECT ION 3 MP3 22 DIR 185 TRK Total directory numbers Total track numbers Figure 7: Initial MP3 Display **Recording MP3 files for the Delphi CD Audio System may require the use of "Full Version" CD-burning software packages (e.g., EasyCD Creator™ or Nero™). 4 CD P01-XX Track number Program number Figure 8: Display During CD Programming MP3 Program Play To program the playing order of tracks or directories on an MP3: 1. In CD/MP3 mode, stop playback. 2. Press "Memory" on the CD panel or "mem/prog" on the remote. "P01 will display and the first three _ _ _ (dashes in the register) will flash on the LCD. 3. Press "Next" or "Prev" on the CD panel or the category keys or numeric keys on the remote to select a directory.