DIRECTV D12MP Installation Guide - Page 23
DisableUserEntry 0x94, GetReturnValue 0x95, Reboot 0x96
View all DIRECTV D12MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
DIRECTV Set-Top Box Information for the Installer 5.10 DisableUserEntry (0x94) Command Label DisableUserEntry Command Byte 0x94 Input Parameter(s) None Return Data Stream None Return Response ACK_FCNOK : Always Success Return Value 0x0000 : Always Success Description The STB executes a DisableUserEntry command by blocking remote control and front panel key presses from reaching the user interface handler. Instead user commands (front panel entries and IR remote control entries) may be obtained using the GetUserCommand service command. 5.11 GetReturnValue (0x95) Command Label Command Byte Input Parameter(s) Return Data Stream Return Response Return Value Description GetReturnValue 0x95 None [RVal3] [RVal2] [RVal1] [RVal0] Note: Return data are in Hex format. ACK_FCNOK : Always Success None : Preserves the previous return value The STB will execute a GetReturnValue command by returning the Return Value from the last issued Command that generated a return value. 5.12 Reboot (0x96) Command Label Command Byte Input Parameter(s) Return Data Stream Return Response Return Value Description Reboot 0x96 None None None(1) None The STB will execute a Reboot command by performing a hard reset of the STB. This command has the same effect as pressing the red reset button on the STB. (1) Since a hard-reset is performed, no return value or return response can be provided. DIRECTV, Inc. Version 2.2 Page 23 of 42 March 5, 2008 DTV-MD-0058