DIRECTV D12MP Installation Guide - Page 6
Introduction
View all DIRECTV D12MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
DIRECTV Set-Top Box Information for the Installer 1 Introduction 1.1 Disclaimer DIRECTV makes no representations or warranties, express or implied, that use of the technologies described in this specification will not infringe patents, copyrights, or other intellectual property rights of third parties. Nothing in this specification should be construed as granting permission to use any of the technologies described. Anyone planning to make use of technology covered by the intellectual property rights of others should first obtain permission from the holder(s) of the rights. This specification is subject to change without notice. DIRECTV does not accept any responsibility whatsoever for any damages or liability, direct or consequential, which may result from use of this specification or any related discussions. These specifications are provided "as is" and the user of these specifications assumes any and all risks associated with the use of these specifications. DIRECTV expressly disclaims any and all representations or warranties, express or implied, regarding the specifications, including without limitation any warranty as to merchantability, fitness for a particular purpose, non-interruption of use, or non-infringement. 1.2 Scope This document provides information on the DIRECTV Set-top box data port, front panel, and remote control commands as an aid for installers, and auxiliary devices. This document is relevant to set-top box (STB) models D10, D11, D12, R15, R16, H10, H20, HR20, H21, HR21 and HR21P. Other models are not supported by this document. 1.3 Notice Previous "Set-top Information for Installer" documents had a companion document listing various peculiarities of some STBs. This "Peculiarities" document must no longer be used. 1.4 Feedback Email feedback to [email protected] DIRECTV, Inc. Version 2.2 Page 6 of 42 March 5, 2008 DTV-MD-0058