Danby DFF1144W Product Manual - Page 7

Care and Maintenance Frequently, a problem is'rninor and a service call may not be necessary, use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby's Toll Free Number for assistance. Difficulty Does not work Refrigerator running too frequently Internal temperature too cold Internal temperature not cold enough Freezer is not cold enough Light will not work Possible Cause No power to unit. Power cord is unplugged. Wrong voltage is being used. Temperature control too high. Door is not closed. Hot food inserted. Doors opened too long or too often. Close proximity to heat source or direct sunlight. Temperature control too high. No power to unit. Power cord is unplugged. Temperature control too low. Door is not closed. Hot food inserted. Doors opened too long or too often. Air flow obstruction. Wrong voltage is being used. Close proximity to heat source or direct sunlight. Temperature control too low. Door not closed. Hot food is inserted. Door opened too long or too often. Wrong voltage is being used. No power to unit. Power cord is unplugged. Bulb is loose, needs replacing or the door switch is stuck. Suggested Solution Check connection of power cord at power source. Plug in unit. Use proper voltage. Check setting and adjust as needed. Close door securely. Be sure that food is cool before inserting. DO NOT keep door open for too long. MINIMIZE door openings. DO NOT place unit close to heat sources or direct sunlight. Check setting and adjust as needed. Check connection of power cord at power source. Plug in unit. Check setting and adjust as needed. Close door securely. Be sure that food is cool before inserting. DO NOT keep door open for too long. MINIMIZE door openings. Allow room for air to circulate around unit. Use proper voltage. DO NOT place unit close to heat sources or direct sunlight. Check setting and adjust as needed. Close door securely. Be sure that food is cool before inserting. DO NOT keep door open for too long. Use proper voltage. Check connection of power cord to power source. Plug in unit. Tighten or replace the bulb. Check the switch for obstructions and clean. 5 OFF1144W