DeLonghi PAC WE130 Owner Manual - Page 12
Using The Remote Control
View all DeLonghi PAC WE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSERTING OR REPLACING THE BATTERIES 21 • Remove the back cover of the remote control (fig. 21); • Insert two R03 "AAA" 1.5V batteries, making sure they are in the correct position (see the instructions inside the battery compartment); • Replace the cover. ✔ If the remote control is replaced or discarded, the batteries must be removed and disposed of in accordance with current legislation as they are harmful to the environment. ✔ Warning: do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak. If the remote control is not be used for a certain length of time, remove the batteries. SETTING THE TIME After having inserted the batteries, the clock on the display flashes until the time is set. Proceed as follows. • Press the or button until the correct time is reached. Hold the button down to run rapidly through first the minutes, then the tens of minutes and then the hours. • Once the correct time has been reached, release the button and press the OK button (23) to confirm. • To cancel the settings programmed on the remote control and restore the 22 original settings, press the RESET (20) button lightly with the point of a pen- cil or pen. USING THE REMOTE CONTROL UNIT The buttons below the remote control display are the same as those on the control panel of the appliance. You should, therefore, refer to the instructions in the section "Operating from the control panel" to turn the 23 appliance on and select the operating mode (AIR CONDITIONING, DEHUMIDIFYING, FAN, or SMART) and the fan speed. The following section describes the additional functions corresponding to the controls on the bottom part of the remote control. BOOST FUNCTION (FIG. 23) Ideal for the summer to cool rooms rapidly. Activate by simply pressing the button. The appliance operates in air conditioning mode at maximum fan speed. While this function is selec- 24 ted, it is not possible to set the temperature or change fan speed. SELECTING THE TEMPERATURE SCALE (FIG. 24) Press the button to switch the displayed temperature scale from Celsius to Fahrenheit and vice-versa. 12