DeLonghi PAC WE130 Owner Manual - Page 6
DeLonghi PAC WE130 Manual
![]() |
View all DeLonghi PAC WE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
AIR-CONDITIONING WITH INSTALLATION If required, your appliance can also be installed semi-permanently (Fig. 7). Proceed as follows: • Drill a 4.17 inche (106 mm) diameter hole respecting the heights shown in fig. 8 and following the indications in figs. 9, 10 and 11. 7 11.8 in 30 cm 8 9 MAX 39 in MAX100 cm 11.8 in 30 cm 4.17 in 106 MIN 14 in MIN 35 cm In the window pane. • Fit the wall flange (S) into the hole. • Fit the air exhaust hose (K) in the housing at the back of the appliance (fig. 1). • Fit the end of the air exhaust hose to the wall flange as shown in fig. 8. When the air exhaust hose is not fitted, the hole can be closed with the flange cap. Keep the air hose as short and free of curves as possible to avoid bottlenecks. ✔ When installing the air conditioner semi-permanently, you should leave a door slightly open as little as 1/2" (1cm) to guarantee correct ventilation. 10 In the wooden kickboard of a French window. 11 In the wall: it is recommended that you insulate the section of the wall using suitable insulation. 6
![](/manual_guide/products/delonghi-pac-we130-owner-manual-084e961/6.png)