Dell 1355CNW User Guide - Page 482
Print Quality Problems, The output is too light
View all Dell 1355CNW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 482 highlights
Problem Printer does not duplex pages. Action Select Flip on Short Edge or Flip on Long Edge from the Duplex menu on the Paper/Output tab in the printer driver. Print Quality Problems NOTE: In this section, some procedures that use the Tool Box can also be performed using the operator panel or Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Configuration Web Tool, see "Understanding the Printer Menus" on page 359 and "Dell Printer Configuration Web Tool" on page 123. The output is too light Action Yes 1 The toner cartridges may be low or need to be The task is replaced. Confirm the amount of toner in each complete. toner cartridge. 1 Check the toner level in the Status tab in the Status Monitor. 2 Replace the toner cartridges as necessary. Is the problem recovered? 2 Verify that the print media is not damp and the The task is correct print media is used. See "Supported complete. Paper Sizes" on page 196. If not, use the print media recommended for the printer. Is the problem recovered? No Go to action 2. Go to action 3. 480 Troubleshooting