Dell 2130cn Color Laser Printer User Guide - Page 21

Printer Maintenance The Printer Maintenance tab includes the System Settings, Paper Density, Registration Adjustment, Adjust Altitude, Reset Defaults, Non-Dell Toner, Initialize PrintMeter, Tray Settings, TCP/IP Settings, and Network Settings pages. NOTE: Values marked by an asterisk (*) are the factory default menu settings. System Settings Purpose: To Use these settings to configure the printer's power management, warning tones, time-out time, operator panel language setting, job log auto print, position of the Print ID, setting of the dump print, setting of the additional memory, setting of the substitute sheet, mm/inch setting, and duplex print settings. Values: Power Saver Timer Mode 1*1 Power Saver Timer Mode 2*1 Audio Tones Fault Time-Out Time-Out Panel Language Auto Log Print Print ID 1-30 Min. 3 Min.* Specifies the time before the printer enters the power saver timer mode 1(sleep mode) after it finishes a job. 5-60 Min. 10 Min* Specifies the time before the printer enters the power saver timer mode 2 (deep sleep mode) after it goes into the power saver timer mode 1. Control Panel Tone Off* Does not emit a tone when the operator panel input is correct. On Emits a tone when the operator panel input is correct. Invalid Key Tone Off* Does not emit a tone when the operator panel input is incorrect. On Emits a tone when the operator panel input is incorrect. Off* Does not emit a tone when the printer becomes ready. Machine Ready Tone On Emits a tone when the printer becomes ready. Job Complete Tone Off* Does not emit a tone when a job is complete. On Emits a tone when a job is complete. Fault Tone Off* Does not emit a tone when a job ends abnormally. On Emits a tone when a job ends abnormally. Alert Tone Off* Does not emit a tone when a problem occurs. On Emits a tone when a problem occurs. Out of Paper Alert Tone Off* Does not emit a tone when the printer runs out of paper. On Emits a tone when the printer runs out of paper. Low Toner Alert Tone Off* Does not emit a tone when toner or some other consumable is low. On Emits a tone when toner or some other consumable is low. Base Tone Does not emit a tone when the operator panel display is returned to the default settings by Off* scrolling the loop menu. Emits a tone when the operator panel display is returned to the default settings by scrolling the On loop menu. 0 Disables the fault time-out. 3-300 sec 60 sec* Specifies the amount of time the printer cancels for a job stops abnormally. 0 Disables the job time-out. 5-300 sec 30 sec* Specifies the amount of time before the printer cancels for jobs that stop abnormally. English* French Italian German Spanish Specifies the language to be used on the operator panel. Dutch Danish Norwegian Swedish Off* Does not automatically output a log of completed jobs from the printer. On Outputs a log of completed jobs from the printer automatically. Off* Does not print the user ID. Top Left Top Right Bottom Left Prints the user ID on the specified location.