Dell 3010cn Color Laser Printer Printer Menus - Page 82
Current Ethernet Settings
View all Dell 3010cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List page, and Completed Jobs page. Port Settings Purpose: To specify whether to enable or disable printing ports and management protocol features. Values: Ethernet Port Settings Ethernet Settings Auto Detects Ethernet transmission rate and the duplex settings automatically. 10BASE-T Half-Duplex Selects 10Base-T Half-Duplex as the default value. 10BASE-T Full-Duplex Selects 10Base-T Full-Duplex as the default value. 100BASE-TX HalfDuplex Selects 100Base-T Half-Duplex as the default value. 100BASE-TX FullDuplex Selects 100Base-T Full-Duplex as the default value. Current Ethernet Settings Displays the current settings of Ethernet. MAC Address Displays the printer's MAC address. LPD Select the check box to enable the LPD. Port9100 Select the check box to enable the Port9100. FTP Select the check box to enable the FTP port. E-Mail Alert Select the check box to enable the E-Mail Alert feature. SNMP Agent Select the check box to enable the SNMP. You can also configure the transport protocol to be used. UDP can be selected as the transport protocol. NOTE: The settings in the Port Settings item are valid only when the printer is rebooted. When you change or set this item, click the Restart printer to apply new settings. button to apply new settings. TCP/IP Purpose: To configure the IP address, subnet mask, and gateway address of the printer. Values: TCP/IP Settings Host Name Specifies the host name up to 15 alphanumeric characters. The default name remains valid if no entry is made. IP Address Mode AutoIP DHCP Automatically sets the IP address. Uses DHCP to set the IP address. BOOTP Uses BOOTP to set the IP address. RARP Uses RARP to set the IP address. Manually Enables the IP address set in IP Address. Set IP Address Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits. Subnet Mask Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 255. Note that 255.255.255.255 is invalid. Gateway Address Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and 254. Note that values 127 and 224 to 254 are not valid for the first three-digits.