Dell 8 Fabric OS Command Reference Manual Supporting Fabric - Page 350
ficonCupShow, bitname, Using Fabric OS commands, Command, Availability
View all Dell 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
2 ficonCupShow ficonCupShow Displays FICON-CUP parameters for a switch. Synopsis ficoncupshow fmsmode ficoncupshow modereg [bitname] ficoncupshow MIHPTO ficoncupshow LP Description Use this command to display FICON-CUP (Control Unit Port) parameters for a switch. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details Operands This command has the following operands: fmsmode Display the FICON Management Server (FMS) mode for the switch. modereg Display the FICON-CUP mode register. If no operand is specified, all mode register bit settings are displayed. If a mode register bit name is specified, then only the value of that bit is displayed. A value of 1 indicates that a given mode register bit is set, and 0 indicates that it is not set. bitname The following operand is optional: Displays the specified mode register bit as either set (1) or not set (0). Valid values for bitname are: POSC Programmed offline state control UAM User alert mode ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited MIHPTO Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO) value in seconds. LP Displays the logical paths on the switch. For each entry, the command displays the port identifier (PID), the LPAR identifier (CHID), reporting state (operational or reset (=nonoperational)), and path (current or primary). Examples To display the FMS mode for the switch: switch:user> ficoncupshow fmsmode fmsmode for the switch: Enabled 318 Fabric OS Command Reference 53-1001764-02