Dell 8 Fabric OS Command Reference Manual Supporting Fabric - Page 994

2 thConfig email Event triggers an e-mail. poortlog Event triggers a port log entry none -buffer value Event triggers no action. Specifies the buffer value for in range behavior. A buffer defines a zone within which event criteria are met, rather than a single threshold value. This operand is valid only with the -trigger options. -nosave Prevents the configuration changes from being saved persistently. This option allows you to make and view changes without overwriting the saved configuration. When you use --set with the -nosave option and the switch reboots your changes will be lost. --apply Applies the custom or default configuration for thresholds, actions, or both. This command allows you to toggle between custom and default settings. The specified configuration takes effect upon execution of this command. When you select custom, the saved configuration becomes effective. You must specify a class and an area when applying a configuration. --cancel Cancels a nonpersistent custom configuration. This command effectively undoes the -nosave operation without reboot. You must specify a class and an area with this command. Thresholds and alarm levels are optional; if omitted, all nonpersistent configurations for the specified class and area are canceled. --show Displays the threshold configuration or run-time status for all configured classes and areas. You can optionally specify a class to display the threshold for all areas in that class. Or you can specify an a class and an area to display the area-specific configuration only. When issued without operands, this command displays all configured thresholds for all Fabric Watch classes. The following operand a are optional and valid only with the --show option. -current_status Displays current values for a specified class and area, as registered by Fabric Watch, or for all port types and areas. The output includes the class, area, port number, circuit number if applicable, current value, and Fabric Watch State. he State field reports whether the current value is above, in range, or below (info) the configured threshold. -only_area Displays a comprehensive listing of all valid Fabric Watch classes and associated areas. If a class is provided, this command displays the areas of the specified class. The following operands are optional with the --apply, --cancel, and --show options; if omitted, defaults are used. -thresh_level def | cust Configures or displays default or custom threshold configuration settings. -action_level def | cust Configures or displays default or custom configuration settings. --help Displays the command usage. 962 Fabric OS Command Reference 53-1001764-02