Dell 8 Fabric OS Command Reference Manual Supporting Fabric - Page 657
Specifies the L2CoS value for Low Priority Traffic. The range is 0 to7.
View all Dell 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 657 highlights
portCfg 2 --l2cos-high l2cos Specifies the L2CoS value for High Priority Traffic. The range is 0 to 7. The default is 0. --l2cos-medium l2cos Specifies the L2CoS value for Medium Priority Traffic. The range is 0 to 7. The default is 0. --l2cos-low l2cos Specifies the L2CoS value for Low Priority Traffic. The range is 0 to7. The default is 0. --dscp-f-class dscp Specifies the DSCP value for F-Class Traffic. The range is 0 to 63. The default value is 0. DSCP is supported only in Fabric OS v6.4.0 and later. --dscp-high dscp Specifies the DSCP value for High Priority. The range is 0 to 63. The default value is 0. DSCP is supported only in Fabric OS v6.4.0 and later. --dscp-medium dscp Specifies the DSCP value for Medium Priority. The range is 0 to 63. The default value is 0. DSCP is supported only in Fabric OS v6.4.0 and later. --dscp-low dscp Specifies he DSCP value for Low Priority. The range is 0 to 63. The default value is 0. DSCP is supported only in Fabric OS v6.4.0 and later. delete tunnel_ID Deletes the specified FCIP tunnel. This command deletes all associated circuits created with the fciptunnel or fcipcircuit commands. Use the portShow command to display all FCIP tunnels and their associated circuits. fcipcircuit Creates an FCIP circuit on an existing tunnel. Use this command to configure additional circuits. The circuit-specific parameters are optional. The syntax for portcfg fcipcircuit is as follows: portcfg fcipcircuit [slot/]ve_port option circuit_ID options [arguments] [optional_arguments] The following options and arguments are supported with fcipcircuit: create circuit_ID remote_ip_addr local_ip_addr comm_rate [circuit_arguments] Creates an FCIP circuit. You must specify the following parameters when creating an additional circuit: circuit_ID Specifies a numeric identifier for the circuit. The circuit ID is an integer value between 0-9 for both the Brocade FX8-24 and the Brocade 7800. remote_ip_addr Specifies the IP address for the remote end of the FCIP circuit. local_ip_addr Specifies the IP address for the local end of the FCIP circuit. The following two operands are mutually exclusive: Fabric OS Command Reference 625 53-1001764-02