Dell 8 Fabric OS Command Reference Manual Supporting Fabric - Page 780
specify multiple index ranges separated by a space, for example
View all Dell 8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 780 highlights
2 portShow Operands This command has the following port operands: slot For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). port Specifies the number of the port to be displayed, relative to its slot for bladed systems. Use switchShow for a listing of valid port numbers. -i index1[-index2] Specifies a port or a range of ports identified by port index numbers. You can specify multiple index ranges separated by a space, for example, 33-38 40-60. Port indexes are supported only if PortSwap is disabled. They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index argument to display the portSwap status, or alternately use portSwapShow. Examples To display the current state of a port: switch:admin> portshow 43 portIndex: 43 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x1000490b PRESENT ACTIVE E_PORT T_PORT T_MASTER G_PORT U_PORT LOGICAL_ONLINE LOGIN LED portType: 18.0 POD Port: Port is licensed portState: 1 Online Protocol: FC portPhys: 6 In_Sync portScn: 16 E_Port Trunk master port port generation number: 0 state transition count: 1 portId: 230100 portIfId: 43020009 portWwn: 20:2b:00:05:1e:07:c7:26 portWwn of device(s) connected: Distance: normal portSpeed: N4Gbps LE domain: 0 FC Fastwrite: OFF Interrupts: 0 Link_failure: 0 Frjt: 0 Unknown: 0 Loss_of_sync: 1 Fbsy: 0 Lli: 11 Loss_of_sig: 2 Proc_rqrd: 9877 Protocol_err: 0 Timed_out: 0 Invalid_word: 14 Rx_flushed: 0 Invalid_crc: 0 Tx_unavail: 0 Delim_err: 0 Free_buffer: 0 Address_err: 0 Overrun: 0 Lr_in: 2 Suspended: 0 Lr_out: 0 Parity_err: 0 Ols_in: 0 2_parity_err: 0 Ols_out: 1 CMI_bus_err: 0 switch:admin> 748 Fabric OS Command Reference 53-1001764-02