Dell Alienware 15 Service Manual - Page 122
Replacing the heat-sink assembly, Procedure, Post-requisites
View all Dell Alienware 15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Replacing the heat-sink assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. Procedure 1 Align the screw holes on the heat-sink assembly with the screw holes on the system board. 2 In sequential order (indicated on the heat-sink assembly), tighten the captive screws that secure the heat-sink assembly to the system board. Post-requisites 1 Follow the procedure from step 3 to step 11 in "Replacing the system board". 2 Replace the display assembly. 3 Replace the hinge covers. 4 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 5 Replace the wireless card. 6 Replace the solid-state drives. 7 Replace the memory modules. 8 Replace the base panel. 122