Dell Alienware 15 Service Manual - Page 63
Replacing the status-light board, Procedure, Post-requisites
View all Dell Alienware 15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Replacing the status-light board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the status-light board with the screw holes on the palm-rest assembly. 2 Replace the screws that secure the status-light board to the palm-rest assembly. 3 Slide the status-light board cable into the status-light board and press down on the latch to secure the cable. Post-requisites 1 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 2 Replace the solid-state drives. 3 Replace the memory modules. 4 Replace the base panel. 63