Dell Alienware 15 Service Manual - Page 43
Replacing the palm rest, Procedure, Post-requisites
View all Dell Alienware 15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Replacing the palm rest WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Follow the procedure from step 1 to step 5 in "Replacing the touch pad". 2 Follow the procedure from step 1 to step 3 in "Replacing the status-light board". 3 Follow the procedure from step 1 to step 4 in "Replacing the power- button board". 4 Follow the procedure from step 1 to step 7 in "Replacing the keyboard". 5 Connect the power-button board cable to the system board. 6 Carefully turn the palm-rest assembly over and slide the keyboard cable, keyboard-backlight cable, macro-keys cable, and macro-keys backlight cable into the slot on the computer base. 7 Align the palm-rest assembly on the computer base and snap it into place. 8 Close the display and turn the computer over. 9 Replace the screws that secure the palm-rest assembly to the computer base. 10 Slide the keyboard-backlight cable, keyboard cable, macro-keys cable, and macro-keys backlight cable into the system board and press down on the latches to secure the cables. 11 Route the keyboard-backlight cable, keyboard cable, and macro-keys cable through the routing guides on the computer base. Post-requisites 1 Replace the solid-state drives. 2 Replace the memory modules. 3 Replace the base panel. 43