Dell Alienware Aurora R16 Owners Manual - Page 81
Processor, Removing the processor
View all Dell Alienware Aurora R16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Steps 1. Align and place the left liquid-cooling assembly fan on the liquid-cooling assembly. 2. Replace the four screws (#6-32x1/4") that secures the left liquid-cooling assembly fan to the liquid-cooling assembly. 3. Align and place the right liquid-cooling assembly fan off the liquid-cooling assembly. 4. Replace the four screws (#6-32x1/4") that secures the right liquid-cooling assembly fan to the liquid-cooling assembly. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. Processor Removing the processor CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. 3. Remove the processor liquid-cooling assembly or processor fan and heat-sink assembly, as applicable. About this task The following images indicate the location of the processor and provide a visual representation of the removal procedure. 81