Dell Dimension 5100C Owner's Manual - Page 88
Replacing the External Modem Connector, Remove the computer cover see
View all Dell Dimension 5100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
www.dell.com | support.dell.com 3 Remove the existing modem: a Disconnect the modem cable from the modem. b Use a small Phillips screwdriver to remove the two screws securing the modem to the system board, and set the screws aside. c Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 4 Install the new modem: a Align the modem with the screw holes and press the modem into the connector on the system board. b Use a Phillips screwdriver to replace and tighten the two screws that secure the modem to the system board. c Connect the modem cable to the modem. 5 Replace the computer cover (see page 91). Replacing the External Modem Connector 1 Follow the procedures in "Before You Begin" on page 53. 2 Remove the computer cover (see page 59). 3 Remove the modem cable from the modem. 4 Remove the external modem connector: a Remove the screw that secures the external modem connector. b Slide the external modem connector away from the slot that holds the modem connector in place. c Lift the modem cable and connector from the computer. 88 Removing and Installing Parts