Dell Dimension 8300N Owner's Manual - Page 77
Reattaching the Front Door, Lower the hinge arms to the vertical position.
View all Dell Dimension 8300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
9 Reattach the front-panel insert. 10 Reconnect the computer power cable to the electrical outlet. 11 Reattach the front door. Reattaching the Front Door CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 9. 1 Shut down the computer through the Start menu (see page 27). 2 Disconnect the computer power cable from the electrical outlet. 3 Lower the hinge arms to the vertical position. 4 Align the two clips on the inside of the front door with the two hinge arms. 5 Press inward on the front door until it clips to both hinge arms. front-door clips (2) front-panel door hinge arms (2) in vertical position Adding Parts 77
Adding Parts
77
9
Reattach the front-panel insert.
10
Reconnect the computer power cable to the electrical outlet.
11
Reattach the front door.
Reattaching the Front Door
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions on page 9.
1
Shut down the computer through the
Start
menu (see page 27).
2
Disconnect the computer power cable from the electrical outlet.
3
Lower the hinge arms to the vertical position.
4
Align the two clips on the inside of the front door with the two hinge arms.
5
Press inward on the front door until it clips to both hinge arms.
hinge arms (2)
in vertical
position
front-door
clips (2)
front-panel
door