Dell EqualLogic PS6610ES EqualLogic PS6610 Storage Arrays Hardware Owners Manu - Page 43
Advanced, Networking, Options
![]() |
View all Dell EqualLogic PS6610ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
6 Advanced Networking Options In addition to connecting all the Ethernet ports (of the same type) on both control modules to network switches, you can also optionally connect the management port to a separate network switch. Configuring a management port enables you to separate management traffic (creating and managing the group, members, volumes, replication, and so on) from the iSCSI data traffic (I/O between applications and volumes, and between replication partners). Configure the Management Port Configuring the 10/100Mbps management port involves hardware steps and software steps. The management port is restricted to group management traffic only; it will not carry iSCSI I/O. Note: Configuring this port is considered an advanced configuration, available if your environment requires this level of security. Hardware Steps 1. Make sure your network environment can support a dedicated management network, with a subnet that is separate from the subnets for iSCSI traffic. 2. On both control modules, connect the port labeled MANAGEMENT to the management network. The location of the management port is shown in Figure 28. Figure 28: Management Port Location Software Steps See the Dell EqualLogic Group Manager Administrator's Guide for the procedure to configure the management network in the Group Manager GUI. 37
![](/manual_guide/products/dell-equallogic-ps6610e-equallogic-ps6610-storage-arrays-hardware-owners-manual-4a209e2/43.png)