Dell External OEMR XL R210II Technical Guide - Page 26

Power, Thermal, Acoustic

Page 26 highlights

Dell 5 Power, Thermal, Acoustic 5.1 Power Supplies The base system includes a single 250W power supply. This unit provides power to the planar and the two internal hard drive bays. Power will be "soft-switched" allowing power cycling using a switch on the front of the system enclosure or through software control (server management functions). The power system is compatible with industry standards, such as ACPI and Server 2000. Standard VRD (Voltage Regulator Down) modules that conform to VRD11.1 specification are used. This reduces the board layout complexity while offering design modularity. As processor speeds increase, a newer VRD can be used to accommodate the power increase with no need to re-spin the board. The VRD is integrated onto the planar and is not field upgradeable. 5.2 Power Supply Connectors on the Planar There are 2 separate power supply connectors on the planar. One connector is an ATX connector (2x12) and the other one is a 2x2 connector to provide an additional two pins for +12V. The connector Pin definition (2 x 12 power connector) is not ATX standard. The 2x12 connector provides 3.3V, 5V, 12V, and 12V standby to the system. (3.3V standby to system is generated from 12V standby). Table 8. Power Supply 24 Pins and Signals Pin SIGNAL 1 P3V3 2 P3V3 3 GND 4 P5V 5 GND 6 P5V 7 GND 8 PS_PWROK 9 P12V_STBY 10 P12V1 11 P12V1 12 P3V3 Pin SIGNAL 13 P3V3 14 P12V1 15 GND 16 PS_ON_N 17 GND 18 GND 19 GND 20 P12V1 21 P5V 22 P5V 23 P5V 24 GND Pin SIGNAL 1 GND 2 GND Table 9. Power Supply 4 Pins and Signals Pin SIGNAL 3 P12V2 4 P12V2 PowerEdge R210 Technical Guide 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

Dell
PowerEdge R210 Technical Guide
26
5
Power, Thermal, Acoustic
5.1
Power Supplies
The base system includes a single 250W power supply. This unit provides power to the planar
and the two internal hard drive bays. Power will be “soft-switched” allowing power cycling
using a switch on the front of the system enclosure or through software control (server
management functions). The power system is compatible with industry standards, such as ACPI
and Server 2000.
Standard VRD (Voltage Regulator Down) modules that conform to VRD11.1 specification are
used. This reduces the board layout complexity while offering design modularity. As processor
speeds increase, a newer VRD can be used to accommodate the power increase with no need to
re-spin the board. The VRD is integrated onto the planar and is not field upgradeable.
5.2
Power Supply Connectors on the Planar
There are 2 separate power supply connectors on the planar. One connector is an ATX
connector (2x12) and the other one is a 2x2 connector to provide an additional two pins for
+12V. The connector Pin definition (2 x 12 power connector) is not ATX standard.
The 2x12 connector provides 3.3V, 5V, 12V, and 12V standby to the system. (3.3V standby to
system is generated from 12V standby).
Table 8.
Power Supply 24 Pins and Signals
Pin
SIGNAL
Pin
SIGNAL
1
P3V3
13
P3V3
2
P3V3
14
P12V1
3
GND
15
GND
4
P5V
16
PS_ON_N
5
GND
17
GND
6
P5V
18
GND
7
GND
19
GND
8
PS_PWROK
20
P12V1
9
P12V_STBY
21
P5V
10
P12V1
22
P5V
11
P12V1
23
P5V
12
P3V3
24
GND
Table 9.
Power Supply 4 Pins and Signals
Pin
SIGNAL
Pin
SIGNAL
1
GND
3
P12V2
2
GND
4
P12V2