Dell Inspiron 1526 Service Manual - Page 37
Palm Rest
View all Dell Inspiron 1526 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Back to Contents Page Palm Rest Dell™ Inspiron™ 1525/1526 Service Manual Removing the Palm Rest CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1. Follow the instructions in Before You Begin. 2. Remove the center control cover (see Removing the Center Control Cover). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the internal card with Bluetooth wireless technology, if installed (see Removing the Internal Card With Bluetooth® Wireless Technology). NOTE: It is not necessary to remove the Bluetooth cable connector from the system board connector. 5. Disconnect the button board cable from the system board. 6. Disconnect the speaker cable from the system board. 7. Remove the display assembly (see Removing the Display Assembly). 8. Remove the nine screws from the bottom of the computer. NOTE: The screw locations may vary slightly from the image shown below. 9. Turn the computer over and remove the two screws securing the top of the palm rest. 10. Disconnect the touch pad connector and the device status lights LED connector from the system board. NOTICE: Do not use force to separate the palm rest from the computer. If you encounter resistance, gently flex or apply pressure to the palm rest, or move along the edge, working away from the area of resistance, until the palm rest is free.