Dell Inspiron 1526 Service Manual - Page 44

Speaker Assembly

Page 44 highlights

Back to Contents Page Speaker Assembly Dell™ Inspiron™ 1525/1526 Service Manual Removing the Speaker Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1. Follow the instructions in Before You Begin. 2. Remove the center control cover (see Removing the Center Control Cover). 3. Remove the keyboard (see Removing the Keyboard). 4. Remove the display assembly (see Removing the Display Assembly). 5. Disconnect the speaker cable connector from the system board. 6. Remove the four screws securing the speaker assembly to the base of the computer. 7. Remove the speaker assembly. 1 screws (4) 2 speaker cable connector 3 speaker assembly Replacing the Speaker Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1. Align the guide holdes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place. 2. Replace the four securing screws. 3. Route the speaker cables carefully through the routing channel. 4. Connect the speaker cable to the system board. 5. Replace the display assembly (see Replacing the Display Assembly). 6. Replace the keyboard (see Replacing the Keyboard). 7. Replace the center control cover (see Replacing the Center Control Cover). Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

Back to Contents Page
Speaker Assembly
Dell™ Inspiron™ 1525/1526 Service Manual
Removing the Speaker Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the center control cover (see
Removing the Center Control Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the display assembly (see
Removing the Display Assembly
).
5.
Disconnect the speaker cable connector from the system board.
6.
Remove the four screws securing the speaker assembly to the base of the computer.
7.
Remove the speaker assembly.
Replacing the Speaker Assembly
1.
Align the guide holdes in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place.
2.
Replace the four securing screws.
3.
Route the speaker cables carefully through the routing channel.
4.
Connect the speaker cable to the system board.
5.
Replace the display assembly (see
Replacing the Display Assembly
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the center control cover (see
Replacing the Center Control Cover
).
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
1
screws (4)
2
speaker cable connector
3
speaker assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.