Dell Inspiron 16 5625 Service Manual - Page 34
Heat sink, Removing the heatsink
View all Dell Inspiron 16 5625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Install the coin-cell battery into its slot on the palm-rest and keyboard assembly. 2. Connect the coin-cell battery cable to the I/O board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Heat sink Removing the heatsink Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. NOTE: The number of screws on the heat sink varies depending on the graphic card configuration ordered. The following image(s) indicate the location of the heatsink and provides a visual representation of the removal procedure. 34 Removing and installing components