Dell Inspiron 16 5625 Service Manual - Page 43
Speakers, Removing the speakers
View all Dell Inspiron 16 5625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
About this task The following image(s) indicate the location of the touchpad and provides a visual representation of the installation procedure. Steps 1. Slide the touchpad onto the palm-rest and keyboard assembly. 2. Replace the two screws (M2x1.8) that secure the touchpad to the palm-rest and keyboard assembly. 3. Align the touchpad bracket and place it on the palm-rest and keyboard assembly. 4. Replace the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly. 5. Adhere the adhesive tape to the touchpad bracket. 6. Open the latch of the touchpad connector on the touchpad and connect the touchpad cable to the touchpad. 7. Open the latch of the touchpad connector on the system board and connect the touchpad cable to the system board. Next steps 1. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever is applicable. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: The wireless-card antennas are attached to the speakers as an assembly and cannot be separated for individual replacement. Services will replace the speakers and the wireless antennas as an assembly part. The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure. Removing and installing components 43