Dell Inspiron 17 5749 Owners Manual - Page 72
Replacing the Heat-Sink Assembly, Procedure, Post-requisites
View all Dell Inspiron 17 5749 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Replacing the Heat-Sink Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can cause damage to the system board and processor. Procedure 1 Align the screw holes on the heat-sink assembly with the screw holes on the system board. 2 In sequential order (indicated on the heat sink), tighten the captive screws that secure the heat-sink assembly to the system board. 3 Connect the fan cable to the system board. 4 Turn the system board over. Post-requisites 1 Follow the procedures from step 2 to step 10 in replacing the system board. 2 Replace the optical-drive connector board. 3 Replace the battery-connector board. 4 Replace the palm rest. 5 Replace the keyboard. 6 Follow the procedures from step 3 to step 5 in replacing the hard drive. 7 Follow the procedures from step 4 to step 5 in replacing the optical drive. 8 Replace the memory module. 9 Replace the wireless card. 10 Replace the base cover. 11 Replace the battery. 72