Dell Inspiron 17 5767 Inspiron 17 5000 Service Manual - Page 60
Replacing the status-light board, Procedure, Post-requisites
View all Dell Inspiron 17 5767 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
GUID-8EDA8A82-09F4-420D-8DE0-82220E44E1C2 Replacing the status-light board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. GUID-4E82CA7B-25BE-40F2-9DA9-76BBD969359F Procedure 1 Place the status-light board in an angle on the palm rest and keyboard assembly and snap it in place. 2 Adhere the status-light board cable to the palm rest and keyboard assembly. 3 Slide the status-light board cable into the connector on the system board and close the latch to secure the cable. 4 Route the speaker cable through the routing guides and place the speaker on the palm rest and keyboard assembly. 5 Connect the speaker cable to the slot on the system board. 6 Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable. 7 Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable. GUID-89853BD6-F17C-4F8B-BF22-480B48241997 Post-requisites 1 Replace the battery. 2 Replace the base cover. 3 Replace the optical drive. 60