Dell Inspiron 17 7773 2-in-1 Inspiron 17 70002-in-1 Service Manual - Page 85
Post-requisites, Entering the Service Tag in the BIOS setup program
View all Dell Inspiron 17 7773 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
11 Connect the I/O-board cable to the system board and close the latch to secure the cable. 12 Adhere the tape that secures the I/O-board cable to the system board. 13 Slide the display cable and the touch-screen board cable into their respective connectors on the system board and close the latches to secure the cables. 14 Adhere the tapes that secure the display cable and touch-screen board cable to their respective connectors on the system board. Post-requisites 1 Replace the solid-state drive/Intel Optane memory module. 2 Replace the heat sink. 3 Replace the memory modules. 4 Replace the battery. 5 Replace the base cover. Entering the Service Tag in the BIOS setup program 1 Turn on or restart your computer. 2 Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. NOTE: Service tag is the alphanumeric identifier located at the back side of your computer. 85