Dell Inspiron 24 5415 All-in-One Service Manual - Page 25
Memory module, Removing the memory module
View all Dell Inspiron 24 5415 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Steps 1. Align the slots on the system-board shield with the ports on the computer. 2. Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base. Next steps 1. Install the I/O cover. 2. Install the back cover. 3. Install the stand. 4. Follow the procedure in After working inside your computer. Memory module Removing the memory module Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the memory module and provides a visual representation of the removal procedure. Removing and installing components 25
Steps
1.
Align the slots on the system-board shield with the ports on the computer.
2.
Replace the four screws (M3x5) that secure the system-board shield to the display-assembly base.
Next steps
1.
Install the
I/O cover
.
2.
Install the
back cover
.
3.
Install the
stand
.
4.
Follow the procedure in
After working inside your computer
.
Memory module
Removing the memory module
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
stand
.
3.
Remove the
back cover
.
4.
Remove the
I/O cover
.
5.
Remove the
system-board shield
.
About this task
The following image indicates the location of the memory module and provides a visual representation of the removal procedure.
Removing and installing components
25