Dell Inspiron 24 5415 All-in-One Service Manual - Page 34
Retractable-camera assembly, Removing the retractable-camera assembly
View all Dell Inspiron 24 5415 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Steps 1. Ensure that the thermal pad covering the M.2 2280 slot on the system board is in place. 2. Align the notch on the solid-state drive with the tab on the M.2 card slot. 3. Slide the solid-state drive into the M.2 card slot on the system board. 4. Replace the screw (M2x3.5) that secures the solid-state drive to the system board. Next steps 1. Install the system-board shield. 2. Install the I/O cover. 3. Install the back cover. 4. Install the stand. 5. Follow the procedure in After working inside your computer. Retractable-camera assembly Removing the retractable-camera assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the stand. 3. Remove the back cover. 4. Remove the I/O cover. 5. Remove the system-board shield. About this task The following image indicates the location of the retractable-camera assembly and provides a visual representation of the removal procedure. 34 Removing and installing components