Dell Inspiron 24 5415 All-in-One Service Manual - Page 68
as applicable., Follow the procedure
View all Dell Inspiron 24 5415 All-in-One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Steps 1. Place the base panel in an upright position and align the screw holes on the base panel with the screw holes on the display-assembly base. 2. Replace the 13 screws (M3x5) that secures the base panel to the display-assembly base. Next steps 1. Install the display panel. 2. Install the antennas. 3. Install the power-button board. 4. Install the display hinges. 5. Install the microphones. 6. Install the system board. 7. Install the media-card reader. 8. Install the heat sink. 9. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable. 10. Install the wireless card. 11. Install the memory module. 12. Install the retractable-camera assembly. 13. Install the coin-cell battery. 14. Install the fan. 15. Install the speakers. 16. Install the system-board shield. 17. Install the hard drive. 18. Install the I/O cover. 19. Install the back cover. 20. Install the stand. 21. Follow the procedure in After working inside your computer. 68 Removing and installing components